M2nano specs
Searching for some information on the M2nano, I came across these specs;
MAX:600mm/S Carving:7mm/S Cutting:0.5mm/S X-Axis Motor:0.33A/Phase Y-Axis Motor: 0.44A/Phase
These numbers give a good reference for what is possible and better with a third party controller and software.
Info was found here;
https://www.aliexpress.com/store/product/CO2-Laser-Rubber-Stamp-Engraving-Machine-K40-LIHUIYU-M-Mother-Main-Board-Control-System-M2-Nano/1518161_32648480580.html
https://www.aliexpress.com/store/product/CO2-Laser-Rubber-Stamp-Engraving-Machine-K40-LIHUIYU-M-Mother-Main-Board-Control-System-M2-Nano/1518161_32648480580.html
Tuesday, December 20, 2016
Saturday, December 17, 2016
Setting up M2nano board instructions
Setting up M2nano board instructions
Here is step by step instructions on how to setup the M2nano board in LaserDRW to work with the K40.
http://www.china-cncrouter.com//downfile/2016110218203903401.pdf
Here is step by step instructions on how to setup the M2nano board in LaserDRW to work with the K40.
http://www.china-cncrouter.com//downfile/2016110218203903401.pdf
Wednesday, December 7, 2016
Melting Sand With A Laser!
Melting Sand With A Laser!
Very interesting.
http://www.williamosman.com/2016/11/melting-sand-with-laser.html
Very interesting.
http://www.williamosman.com/2016/11/melting-sand-with-laser.html
Saturday, December 3, 2016
LaserWeb Patreon

LaserWeb Patreon
I know Bonne Wilce brought this up in passing but as the software improves and more people are using it, I am sure the users would be willing to donate a monthly amount for the use of the software. A single dollar/euro/(more than a few) rands/pounds a month would be a great start for most. A lot of the sites I frequent put it this way, "...a few dollars/euros/(more than a few) rands/pounds a month is the same as a single beer, so why not buy your coder a cold beer once a month!" Most people would be happy to have an automated payment taken out monthly or even yearly.
Monday, November 28, 2016
Lightobject Air Assist install video
Lightobject Air Assist install video
I found this video that explains how to install the LO air assist. It explains how it comes apart and how to install the lens. Great info for people wanting to upgrade.
https://www.youtube.com/watch?v=DpgcQg_Y8co
https://www.youtube.com/watch?v=DpgcQg_Y8co
I found this video that explains how to install the LO air assist. It explains how it comes apart and how to install the lens. Great info for people wanting to upgrade.
https://www.youtube.com/watch?v=DpgcQg_Y8co
https://www.youtube.com/watch?v=DpgcQg_Y8co
Thursday, November 24, 2016
90+ VIDEOS TAKE YOU FROM LASER CHUMP TO LASER CHAMP Article from Hackaday. Link below
90+ VIDEOS TAKE YOU FROM LASER CHUMP TO LASER CHAMP Article from Hackaday. Link below
Few of us document the progression of our side projects. For those who do, those docs have the chance at becoming a tome of insight, a spaceman’s “mission log” found on a faraway planet that can tell us how to tame an otherwise cruel and hostile world. With the arrival of the RDWorks Learning Lab Series, Chinese laser cutters have finally received the treatment of a thorough in-depth guide to bringing them into professional working order.
In two series, totaling just over 90 videos (and counting!) retired sheet-metal machinist [Russ] takes us on a grand tour of retrofitting, characterizing, and getting the most out of your recent Chinese laser cutter purchase.
Curious about laser physics? Look no further than part 2. Wonder how lens size affects power output? Have a go at part 39. Need a supplemental video for beam alignment? Check out part 31. For every undocumented quirk about these machines, [Russ] approaches each problem with the analytic discipline of a data-driven scientist, measuring and characterizing each quirk with his suite of tools and then engineering a solution to that quirk. In some cases, these are just minor screw adjustments. In other cases, [Russ] shows us his mechanical wizardry with a custom hardware solution (also usually laser cut). [Russ] also brings us the technical insight of a seasoned machinist, implementing classic machinist solutions like a pin table to produce parts that have a clean edge that doesn’t suffer from scatter laser marks from cutting parts on a conventional honeycomb bed.
Solid build logs are gems that are hard to come by, and [Russ’s] Chinese laser cutter introduction shines out as a reference that will stand the test of time.
YouTube Channel
https://www.youtube.com/channel/UCqCyShJXqnElPTUnxX0mD5A
Information from Hackaday
http://hackaday.com/2016/11/24/90-videos-take-you-from-laser-chump-to-laser-champ/
http://hackaday.com/2016/11/24/90-videos-take-you-from-laser-chump-to-laser-champ/
Few of us document the progression of our side projects. For those who do, those docs have the chance at becoming a tome of insight, a spaceman’s “mission log” found on a faraway planet that can tell us how to tame an otherwise cruel and hostile world. With the arrival of the RDWorks Learning Lab Series, Chinese laser cutters have finally received the treatment of a thorough in-depth guide to bringing them into professional working order.
In two series, totaling just over 90 videos (and counting!) retired sheet-metal machinist [Russ] takes us on a grand tour of retrofitting, characterizing, and getting the most out of your recent Chinese laser cutter purchase.
Curious about laser physics? Look no further than part 2. Wonder how lens size affects power output? Have a go at part 39. Need a supplemental video for beam alignment? Check out part 31. For every undocumented quirk about these machines, [Russ] approaches each problem with the analytic discipline of a data-driven scientist, measuring and characterizing each quirk with his suite of tools and then engineering a solution to that quirk. In some cases, these are just minor screw adjustments. In other cases, [Russ] shows us his mechanical wizardry with a custom hardware solution (also usually laser cut). [Russ] also brings us the technical insight of a seasoned machinist, implementing classic machinist solutions like a pin table to produce parts that have a clean edge that doesn’t suffer from scatter laser marks from cutting parts on a conventional honeycomb bed.
Solid build logs are gems that are hard to come by, and [Russ’s] Chinese laser cutter introduction shines out as a reference that will stand the test of time.
YouTube Channel
https://www.youtube.com/channel/UCqCyShJXqnElPTUnxX0mD5A
Information from Hackaday
http://hackaday.com/2016/11/24/90-videos-take-you-from-laser-chump-to-laser-champ/
http://hackaday.com/2016/11/24/90-videos-take-you-from-laser-chump-to-laser-champ/
Subscribe to:
Posts (Atom)
